Stainless steel flange type Y filter selection
- Apr 03, 2018 -

Stainless steel flange type Y filter selection

Stainless steel flange Y-type filters are often installed on the inlet end of hydraulic control valves, pressure reducing valves, pressure relief valves, constant water valves, etc. to eliminate impurities in the medium and prevent particulate impurities from entering the channel, causing wall plugs. To protect the fittings on the equipment piping from wear and clogging.

 Stainless Steel Flange Y Filter Product Picture


Stainless steel flange type Y filter selection

    The general water net is 18-30 mesh/cm2, the ventilation net is 40-100 mesh/cm2, and the oil net is 100-300 mesh/cm2.

    1. Import and export path: In principle, the filter's inlet and outlet diameter should not be less than the matching pump inlet diameter, generally consistent with the import pipeline caliber. 

    2. Nominal pressure: Determine the pressure rating of the filter according to the highest possible pressure in the filter line.

    3. The choice of 3 mesh number: The main consideration is the particle size of the impurity to be intercepted, depending on the process requirements of the media process. The size of particle sizes that can be intercepted by various specifications of filters can be directly referred to our company. 

    4. Filter Material: The material of the filter is generally the same as the material of the connected process piping. For different service conditions, the cast iron, carbon steel, low alloy steel or stainless steel filter can be selected.